Electric‑arc Furnace Working Principle

Sep 18, 2026

Leave a message

Electric‑arc Furnace Working Principle

The electric‑arc furnace generates heat by means of electric arcs formed between electrodes and metallic charge materials. Its thermal efficiency is affected by arc length, burden stacking condition, radiative heat‑exchange conditions inside the furnace, slag coverage, chemical‑heat contribution from oxygen and carbon injection, as well as electrode control and power‑supply system stability. Instead of simple heating only, the core objective of an electric‑arc furnace is to integrate electric energy, chemical energy and thermal processes for high‑efficiency smelting.

II. Operation of Electric‑arc Furnace

1. Arc Strike

Upon fresh charging, the contact between electrodes and charge materials remains unstable. The primary target is to establish electric arcs and avoid excessive impact.

2. Melting

With continuous arc energy input, charge materials melt gradually and the molten bath forms. This phase features high power demand and heavy load fluctuation, causing the most remarkable disturbance to power grids.

3. Refining

After molten metal is formed, the process proceeds to temperature adjustment and composition modification.

III. AC Electric‑arc Furnace

An AC electric‑arc furnace adopts three‑phase AC power supply, with three graphite electrodes generating three‑phase electric arcs respectively.

It suffers arc discontinuity and heavy load fluctuation caused by current zero‑crossing.Common measures to improve operational stability are listed below:

Automatic electrode regulation

On‑load tap‑changing of furnace transformer

Short‑network optimization

Series‑connected reactor

Dynamic compensation via SVC or STATCOM

Advantages: proven technology, complete equipment system, abundant operational experience and wide adaptability.Disadvantages: prominent voltage flicker, heavy reactive‑power impact, high electrode consumption and high requirements for grid capacity.

IV. DC Electric‑arc Furnace

A DC electric‑arc furnace is generally equipped with one top electrode plus bottom electrodes or a bottom current‑collecting system.

Advantages: stable arc performance, low flicker level and low electrode consumption, suitable for large‑capacity continuous production.

Disadvantages: complex rectifier unit, strict harmonic mitigation requirements, complicated maintenance for bottom electrodes and high reliability requirements for the bottom conductive system.

说明: