Coke Oven: Structure and Working Principle
A coke oven is a kiln specially used for coal carbonization to produce coke, an indispensable thermal equipment in the coking process. It is generally elaborately built with refractory bricks and refractory blocks to guarantee stable operation under high-temperature conditions. Modern coke ovens, especially those mainly designed to produce metallurgical coke, not only feature high-efficiency coking capacity but also can recycle chemical byproducts generated during coal carbonization. A complete coke oven consists of the oven body and auxiliary equipment. The core parts of the oven body include the oven top, combustion chambers, carbonization chambers, slope flue zones and regenerators, which are interconnected via delicately designed flues and chimneys. The entire coke oven is solidly laid on a concrete foundation. Though modern coke ovens share similar basic structures, they differ in coal charging methods, heating modes and fuel types, giving rise to various classifications of coke ovens.
Construction of Modern Coke Ovens
A modern coke oven comprises core components including carbonization chambers, combustion chambers, regenerators, slope flue zones, oven top and reinforced foundations. The carbonization chamber is where coal materials are heated in an air-isolated environment and converted into coke. Inside the coke oven, carbonization chambers and combustion chambers are arranged alternately and tightly separated by refractory materials such as silica bricks. Each combustion chamber contains 20 to 30 vertical heating flues. Preheated gas (some high-calorific-value gas without preheating) mixes with air and combusts at the bottom of vertical heating flues, transferring heat to the side walls of adjacent carbonization chambers.
Located at the lower part of the coke oven, regenerators recover heat from high-temperature waste gas to preheat heating gas and combustion air. The slope flue zone serves as an inclined passage connecting regenerators and combustion chambers. The oven top sits above carbonization chambers and combustion chambers; its thickness is determined by structural strength requirements and the demand to lower surface temperature of the oven top. The oven top is equipped with coal charging holes and ascension pipe holes for feeding coal and extracting raw coal gas produced during coal carbonization. Inspection holes are also arranged to observe flame conditions inside each heating flue and adjust temperature and pressure based on monitoring data.
The whole oven structure is stably constructed on specially treated concrete foundations. Each regenerator is connected to flues via waste gas valves. Flues are usually arranged inside or on both sides of the foundation and finally linked to the chimney.
It is worth noting that one carbonization chamber equals one oven hole, and a single coke oven unit is composed of dozens of orderly arranged oven holes. Based on different heating system structures, modern coke ovens are categorized into multiple types, such as twin-heating-flue type, split-flue type and over-cross flue type. Among them, the twin-heating-flue type is the most widely adopted, featuring paired ascending and descending flues that jointly form a complete combustion chamber. The production capacity of a coke oven is mainly determined by the size of carbonization chambers and the coking cycle duration.

